Giving the mixture to finish the desired color is done by adding color (dye). You can use the tones of the base palette or mix them with each other, as well as change the concentration of the tint in the final composition. The uniformity of its distribution in the entire mixture for decorative plaster is achieved by mixing with a drill with a special nozzle, included at low speed.

The Aspect of Tiring

When tinting a large volume of plaster manually, you will have to make several batches. In this case, you are most likely to encounter the problem of getting into color. It is unlikely that it will be possible to repeat the mixing of the basic composition with the color scheme with perfect accuracy. That is why it is recommended to order color matching services from professionals who not only mix all the components in the required proportions, but also correctly calculate the required amount of product. Now click here to know all about it.

• The process of finishing with Polished plaster directly begins with the application of a base. The base layer should be uniform and thin. It acts as a kind of background for subsequent manipulations. It is recommended to work on small areas (about 1 m²) of the wall. The edges of the latter should be left uneven so that the boundaries between them look natural.

It is recommended to use a special trowel. The Polished trowel, or “trowel”, is a specialized tool designed to apply the Polished.

Among the requirements for the aforementioned trowel, the following stand out:

• It should not have chips and bumps, it should be absolutely smooth and well polished.
• The trowel should be as comfortable as possible in the hand, have a suitable handle.
• Trowel shape is a rectangle with rounded edges, minimizing the risk of accidentally damaging the surface.
• The right choice of repair tools is an integral part of the process of achieving a high-quality and attractive outward result.

The first layer should completely dry, which will take at least 4 hours. The technique of applying the second and subsequent layers may be different. Depending on the tools used and the manipulations of the master, the wall surface is covered with a particular pattern with veins, tints of color and other nuances characteristic of a polished natural stone. The number of approaches to staining can reach 10-12. Thus, the depth of the picture is gradually created, which makes the Polished finish unique in its aesthetic properties.

In this case, a lot depends on the experience and professionalism of the master performing the design procedures. It is almost impossible from the first attempt to apply the Polished plaster in such a way that it appears before you in all its stunning beauty. Entrusting this process to professionals, you can count on the fact that the result will please you, and the money spent on the purchase of finishing and consumables will not be thrown to the wind.

The last layer of Polished plaster should be very thin and smooth. After drying, it must be grouted, or iron. The indicated polishing step may be final. If you want to make the coating more durable, as well as glossy, then you can use wax as the so-called “finish”. It is applied in the thinnest layer and polished with a soft cloth or a special nozzle on a drill.